Borderless Printing Specification - Epson Stylus Pro 7700 Service Manual

Large format color inkjet printer
Hide thumbs Also See for Stylus Pro 7700:
Table of Contents

Advertisement

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908

1.3.4 Borderless Printing Specification

AVAILABLE PAPER TYPE
For the paper types and sizes that support the borderless printing, see
Designated Paper" on page
29.
BORDERLESS PRINTING MODE
The following types of borderless printing are available with the printer driver.
Table 1-7. Borderless Printing Mode
Driver Setting
Printer Operation
Prints an image bleeding it off
the left and right edges of
paper. The top and bottom
margins are determined by
ROLL PAPER MARGIN
Normal Cut*
2
setting.
Prints an image bleeding it off
the all edges of paper.
The cutting methods is as
follows.
The minimum width
required for cutting is
Single Cut
applied as the top margin
*
1
*
2
of the first page, then the
top margin is cut off during
printing.
No margin is provided between pages, and the
cutting is made on the border between the pages.
When the job is finished, the bottom side of the last
page is cut off without margin.
PRODUCT DESCRIPTION
Driver Setting
"1.3.2.2
Double Cut
*
1
*
2
*
3
Remarks
Default
Borderless printing is not available for
Note :
Note "*1": The cut pages vertical length becomes about 2mm shorter than the specified size.
"*2": Color inconsistencies or ink smudges due to the interruption of printing for cutting off top
• Printing is interrupted
for cutting off the top
margin of the first
page. This may cause
color inconsistencies
depending on the print
data.
• The cut line between
pages may be slightly
off the border.
Printing Specifications
Table 1-7. Borderless Printing Mode
Printer Operation
Prints an image bleeding it off
the all edges of paper.
The cutting methods is as
follows.
The auto refresh margin is
applied as the top margin
of the first page, then the
top margin is cut off during
printing.
The bottom side of each
page is cut off without margin.
The minimum width required for cutting is applied
as margins between pages.
Epson Stylus Pro WT7900/WT7910
margins are likely to occur on the following papers.
• Doubleweight Matte Paper
• Singleweight Matte Paper
• Enhanced Matte Paper
• Textured Fine Art Paper
• UltraSmooth Fine Art Paper
Revision I
Remarks
• Printing is interrupted
for cutting off the top
margin of the first
page. This may cause
color inconsistencies
depending on the print
data.
• The top and bottom
sides of each page are
cut off at the position
slightly inward the
image edges so that no
white margin appears
on the edges of the cut
pages. This causes the
vertical length of the
cut page about 2mm
shorter than the
specified length.
.
42
Confidential

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Stylus pro 7900Stylus pro 9900Stylus pro wt7900Stylus pro 7710mStylus pro wt7910

Table of Contents