Epson Stylus Pro 7700 Service Manual page 279

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
8. Release the Ink Tubes from the two hooks on the Ink Cartridge Holder R.
9. Pull the Ink Tube backward to give it some slack.
Pull the Ink Tube forward to remove the slack. Route the Ink Tube
so as not to apply load to the bend of the tube at the front of the
printer.
10. Release the Ink Tubes from the six hooks on the Ink Tube Guide.
Be careful not to apply load to the joint of the Ink Cartridge Holder
C A U T I O N
R and the Ink Tube.
DISASSEMBLY & ASSEMBLY
- Rear right -
- Rear right -
Disassembly and Assembly Procedure
Ink Tube Guide
Figure 4-126. Releasing the Ink Tube Guide (before released)
Figure 4-127. Releasing the Ink Tube Guide (after released)
Revision I
Hook
279
Confidential