Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
COPY SETTINGS
The following copy settings can be made.
Copy color (Color or B&W)
Quality (Draft, Normal, Fine)
Size (enlarge setting and with border/borderless setting)
Density (0, ± 2)
Paper type (Plain paper, Singleweight Matte, Doubleweight Matte, Enhanced
Matte, Premium Glossy 170)
Auto cut setting (Enable or Disable)
Figure 7-3. Copy Settings
The "XX -> AUTO" in the size setting enlarges the original image to fit in any of the
following paper sizes or widths depending on the detected size of loaded paper.
A2 (420 mm)
B2 (515 mm)
A1 (594 mm)
17" (432 mm)
24" (610 mm)
When any size other than the above is loaded, the original is enlarged to fit in the any
one of the above size closest to the detected size of loaded paper. Therefore, margins
like shown in
Figure 7-4
(the gray portion) will appear.
Epson Stylus Pro 7700M/7710M (Copy Mode)
Figure 7-4. Automatically Enlarged Printed Image
The paper type setting can be made in both the copy mode and
C H E C K
P O I N T
print mode. Changing the setting in the print mode also
changes the setting in the copy mode.
When copying on paper whose size is not listed in the SIZE
menu, such as 17" and 24" width, "XX -> AUTO" must be
selected in the SIZE setting.
The copy function does not work with the following settings.
C A U T I O N
With the paper width detection disabled in the print mode,
"XX -> AUTO" is specified in the SIZE setting.
The following settings when using the ADF
•
SIZE: "XX -> A0", "4x6 -> XX", or "XX -> AUTO
When
(BANNER)"
PAPER TYPE: "Premium Glossy 170"
•
Copy Mode
A
Paper Feed Direction
Revision I
463
Confidential