Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
7.4 Copy Mode
MODE SWITCHING
When the pause button is pressed while the printer is in the idle state, "GO TO
PRINTER MODE", "PAUSE CANCEL" and "JOB CANCEL" menus are displayed.
Each press of the pause button switches between the three menus and pressing the OK
button executes the selected menu (changes the mode).
While the printer is in the print mode, the copy start button on
C A U T I O N
the scanner is disabled. To use the copy function, the printer
must be in the copy mode.
The copy function is not available when the printer is not idling
such as in an error state.
Figure 7-1. Mode Switch Screen
Epson Stylus Pro 7700M/7710M (Copy Mode)
THE NUMBER OF COPIES SETTING
The number of copies can be specified on the top screen of the copy mode. Pressing the
[OK] button starts copying. While the copy mode top screen is displayed, printing from
a PC is possible.
The printer can perform print jobs sent from a PC while it is
C H E C K
P O I N T
displaying the copy mode top screen.
When multiple number of copies is specified with all the following
C A U T I O N
settings made, the document is scanned for each print.
Color/Monochrome: Color
Copy paper size: Larger than A1
Copy paper type: Photo paper
When
Do not remove the document from the document glass until the last
scanning is complete.
Figure 7-2. The Number of Copies Setting Screen
Copy Mode
Revision I
462
Confidential