Epson Stylus Pro 7700 Service Manual page 350

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4. Remove the E-ring.
5. Pull out the shaft.
6. Remove the O-ring, and remove the Paper Pressing Unit.
First align the markings on the gears on the left and the right side of
the Paper Pressing Unit with the markings on the gears on the main
body, then install the Paper Pressing Unit.
Left side
DISASSEMBLY & ASSEMBLY
Right side
Disassembly and Assembly Procedure
O-ring
Paper Pressing Unit
E-ring
Shaft
Figure 4-231. Removing the Paper Pressing Unit
Revision I
350
Confidential