Epson Stylus Pro 7700 Service Manual page 323

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
5. Remove the four screws that secure the Shield Plate, and remove the three clamps
and the Shield Plate.
B) Black, Phillips, Bind S-tite M3x6: four pieces
6. Disconnect all the connectors on the Main Board.
7. Remove the three screws that secure the Main Board Assy, and remove the Main
Board Assy.
C) Black, Phillips, Bind S-tite M3x6: three pieces
Figure 4-189. Removing the Shield Plate
DISASSEMBLY & ASSEMBLY
Clamps
Clamp
Shield Plate
Disassembly and Assembly Procedure
CN1 CN24* CN23
Main Board Assy
B
Figure 4-191. Removing the Main Board Assy
CN17 CN19* CN18
CN14*
CN11*
CN10* CN15*
CN8* CN26*
CN22 CN28
CN7* CN29
*: Unused connectors
Figure 4-190. Connector location
C
C
Revision I
CN4*
CN2*
CN3
C
323
Confidential