Epson Stylus Pro 7700 Service Manual page 408

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
6. Enter the following parameters that measured in
Return to Step 2.
Epson Stylus Pro WT7900/WT7910
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu
simultaneously.
→
2. Select SELF TESTING Mecha Adjustment
3. Press [OK] while [Enter] Print
The adjustment pattern will be printed.
4. Measure the distance as shown in
Within the standard value: Turn the printer OFF and finish the adjustment.
Out of the range: Go to
When measuring the value, make sure to put the adjustment
C A U T I O N
pattern on the horizontal surface.
→
5. Select Feed Adj Input.
6. Enter the following parameters that measured in
Return to Step 2.
ADJUSTMENT
Step 4 and press [OK].
] + [Paper Feed ] + [OK]
→ →
Feed Adj Printing.
is displayed.
Figure 5-67.
Step 5.
Step 4 and press [OK].
Paper feeding direction
PF Related Adjustment
Measuring
distance
Figure 5-67. Adjustment Pattern
Revision I
408
Confidential