Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.5.6 Cutter Unit
1.
Remove the IC Cover (L/R) and the IC Shaft Cover (L/R).
2.
Remove the Maintenance Tank (L/R).
NOTE: There is no Maintenance Tank (L) mounted for the Epson Stylus Pro
7700/7710/7700M/7710M/7900/7910/WT7900/WT7910/7890/7908.
3.
Remove the Control Panel.
(p203)
4.
Remove the Right Cover.
(p209)
5.
Remove the Left Cover.
(p211)
6.
Unlock the Carriage Unit.
(p201)
7.
Open the Front Cover (Middle).
8.
Remove the screw that secures the Ink Tube Guide, and remove the Ink Tube
Guide.
A) Silver, Phillips, Bind machine screw M3x8: one piece
9.
Remove the seven EJ Roller Units from the Cutter Unit.
10. Push down the handle, and remove the Cutter Cover.
DISASSEMBLY & ASSEMBLY
(p206)
(p208)
Disassembly and Assembly Procedure
Cutter Unit
A
Ink Tube Guide
Mid-Front Cover
Figure 4-93. Removing the Ink Tube Guide
Cutter Cover
EJ Roller Unit
Figure 4-94. Removing the EJ Roller Unit
Revision I
Front Cover (Middle)
EJ Roller Unit
Handle
257
Confidential