Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.8.12 Mount Sensor
1.
Remove the Color Measurement Device.
2.
Remove the Mounter.
(p327)
3.
Remove the Front Cover.
(p331)
4.
Remove the Right Cover.
(p328)
5.
Remove the two screws that secure the Mount Sensor Holder, and remove the
Mount Sensor Holder.
A) Silver, Phillips, Bind machine screw M3x6: two pieces
6.
Disengage the four hooks that secure the Mount Sensor, and detach the Mount
Sensor from the Mount Sensor Holder.
7.
Disconnect the connector from the Mount Sensor.
DISASSEMBLY & ASSEMBLY
(p325)
Disassembly and Assembly Procedure
Mount Sensor Holder
Connector
Mount Sensor
Figure 4-211. Removing the Mount Sensor
Revision I
A
338
Confidential