User's Guide
Copying
Copying Basics
1. Load paper in the printer.
When loading in the rear paper feed slot, do not load paper until the printer prompts you to do so.
2. Place the originals.
3. Enter Copy from the home screen using the
4. Set the number of copies using the – or + button.
5. Select color copy or monochrome copy using the
6. Select Paper and Copy Settings using the
the paper size and the paper type and change the settings if necessary. Select the setting items using the
d
button and change the settings using the
Note:
If you want to copy by reducing or enlarging the size of a document by a specific percentage, select Custom Size as the
Reduce/Enlarge setting, and then specify a percentage using the – or + button. You can change the percentage in
increments of 5% by pressing and holding down the – or + button.
x
7. Press the
button. When printing from the rear paper feed slot, press the
when you are instructed to do so.
Note:
The color, size, and border of the copied image are slightly different from the original.
Related Information
"Loading Paper in the Paper Cassette 1" on page 41
&
"Loading Paper in the Paper Cassette 2" on page 45
&
"Loading Paper in the Rear Paper Feed Slot" on page 49
&
"Placing Originals on the Scanner Glass" on page 53
&
"Menu Options for Copy Mode" on page 97
&
Menu Options for Copy Mode
Note:
Available menus vary depending on the layout you selected.
The number of copies:
Enter the number of copies.
Copying
l
r
or
button, and then press the OK button.
l
r
or
button.
d
button, and then press the OK button. Check the settings such as
l
r
or
button.
97
x
button, and then load paper
u
or