Front Seat Belt Height Adjuster Removal; Installation; Occupant Restraint Controller Description; Operation - Chrysler PT Cruiser Service & Repair Manual

Hide thumbs Also See for PT Cruiser:
Table of Contents

Advertisement

8O - 12
RESTRAINTS
FRONT SEAT BELT HEIGHT
ADJUSTER
REMOVAL
WARNING: FRONT SEAT BELT ASSEMBLIES MUST
BE REPLACED AFTER A COLLISION.
(1) Remove B-pillar trim (Refer to 23 - BODY/IN-
TERIOR/B-PILLAR TRIM - REMOVAL).
(2) Remove the two bolts attaching front seat belt
height adjuster to B-pillar (Fig. 16).
(3) Remove front seat belt height adjuster from
vehicle.
Fig. 16 FRONT SEAT BELT HEIGHT ADJUSTER
1 - FRONT SEAT BELT HEIGHT ADJUSTER
2 - TAB IS ON BOTTOM

INSTALLATION

WARNING: FRONT SEAT BELT ASSEMBLIES MUST
BE REPLACED AFTER A COLLISION.
NOTE: Front seat belt height adjuster must be in
the lowest position when Installing adjuster knob.
(1) Place into position the front seat belt height
adjuster.
(2) Install bolts attaching the front seat belt height
adjuster to B-pillar. Tighten all seat belt bolts to 40
N·m (30 ft. lbs.) torque.
(3) Install B-pillar trim (Refer to 23 - BODY/INTE-
RIOR/B-PILLAR TRIM - INSTALLATION).
OCCUPANT RESTRAINT
CONTROLLER
DESCRIPTION
Fig. 17 OCCUPANT RESTRAINT CONTROLLER
LOCATION
1 - PARKING BRAKE
2 - OCCUPANT RESTRAINT CONTROLLER
3 - CONSOLE GEAR SELECTOR
The Occupant Restraint Controller (ORC) is also
sometimes referred to as the Airbag Control Module
(ACM). The ORC is mounted on the tunnel floor pan,
between the transmission shifter and parking brake
(Fig. 17).
The ORC contains a microprocessor, the impact
sensing device, and energy storage capacitors. The
microprocessor contains the airbag system logic. The
airbag system logic includes On-Board Diagnostics
(OBD) capability, and communicates with the instru-
ment cluster circuitry on the Programmable Commu-
nication Interface (PCI) data bus to control the
airbag indicator lamp.

OPERATION

The impact sensing device is located inside the
ORC. The sensing device provides crash severity dis-
crimination and confirmation of a crash. The ORC
monitors the system to determine the system readi-
ness. The ORC contains on-board diagnostics (OBD),
and will illuminate the AIRBAG warning lamp on
the cluster when a fault occurs. The warning indica-
tor is illuminated for six to eight seconds every time
the vehicle is started.
PT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents