Installation - 1.6L; Installation- 2.0/2.4L - Chrysler PT Cruiser Service & Repair Manual

Hide thumbs Also See for PT Cruiser:
Table of Contents

Advertisement

8I - 10
IGNITION CONTROL
IGNITION COIL (Continued)
(8) Pull coil up (Fig. 21) and out by the throttle
body side of the intake manifold (Fig. 22).
Fig. 21 IGNITION COIL REMOVAL/INSTALLATION
Fig. 22 IGNITION COIL REMOVED
INSTALLATION

INSTALLATION - 1.6L

(1) Install coil and insulators (Fig. 23).
(2) Tighten bolts to 12 N·m (105 ±20 in. lbs.).
(3) Install gasket to upper intake manifold (Fig.
24) and (Fig. 25).
(4) Install the 4 bolts from the upper to lower
manifold (Fig. 12).
(5) Install the 2 bolts to the upper manifold to
struts (Fig. 13) and (Fig. 14).
(6) Install the PCV hose and the brake booster
hose to the upper manifold
Fig. 23 RUBBER INSULATORS AND COIL
1 - Rubber Insulators
2 - Coil
Fig. 24 UPPER INTAKE GASKET
(7) Install the purge hose to throttle body.
(8) Connect the electrical connector to throttle
body.
(9) Connect the negative battery cable.
(10) Install air cleaner assembly cover and connect
the inlet air temperature sensor (Fig. 11).

INSTALLATION- 2.0/2.4L

The electronic ignition coil pack attaches directly
to the valve cover (Fig. 16).
(1) Install coil pack on valve cover. Tighten the
bolts to 11.8 N·m (105 ±20 in. lbs.).
PT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents