Chrysler PT Cruiser Service & Repair Manual page 229

PT
MASTER CYLINDER - RHD (Continued)
NOTE: Replacement master cylinder assemblies
come pre-filled with fluid. No fluid service or sys-
tem bleeding should be required, unless the
hydraulic system has lost an excessive amount of
fluid and has ingested air into the master or slave
cylinder assembly.
(1) Remove air cleaner assembly (Fig. 47).
Fig. 47 Air Cleaner Assembly Removal/Installation
1 - AIR CLEANER ASSEMBLY
(2) Disconnect battery negative cable.
(3) Raise vehicle on hoist.
(4) 2.2L Turbo
equipped models: Using Tool 6638A, disconnect
clutch hydraulic quick-connect (Fig. 48) (Fig. 49).
Diesel and 2.4L
Fig. 48 Disconnect Hydraulic Circuit Using Tool
1 - QUICK CONNECT FITTING
2 - TOOL 6638A
Turbo-
Fig. 49 Clutch Slave Cylinder Hydraulic
Connection—Diesel and Turbo Models
1 - MASTER CYLINDER TUBE
2 - SLAVE CYLINDER
CLUTCH
6638A
6 - 27