Chrysler PT Cruiser Service & Repair Manual page 310

8A - 10 AUDIO
RADIO NOISE SUPPRESSION COMPONENTS (Continued)
HOOD HINGE GROUND STRAP
(1) Disconnect and isolate the battery negative
cable.
(2) Remove bolt from fender (Fig. 12).
Fig. 12 HOOD HINGE GROUND STRAP
(3) Remove bolt from hood and remove strap.
MUFFLER GROUND STRAP
(1) Disconnect and isolate the battery negative
cable.
(2) Remove bolt from rear floor pan (Fig. 13).
Fig. 13 MUFFLER GROUND STRAP
(3) Remove bolt from muffler and remove strap.
RADIO NOISE SUPPRESSION CAPACITOR
(1) Disconnect and isolate the battery negative
cable.
(2) Disconnect electrical harness connector from
capacitor (Fig. 14).
Fig. 14 RADIO NOISE CAPACITOR - TYPICAL
1 - RADIO NOISE CAPACITOR
2 - EXHAUST MANIFOLD
(3) Remove bolt from capacitor and remove capac-
itor.
STRUT BRACKET TO BODY GROUND STRAP
(1) Disconnect and isolate the battery negative
cable.
(2) Remove bolt from strut (Fig. 15)
Fig. 15 STRUT BRACKET TO BODY GROUND
(3) Remove strap from frame rail.
STRAP
PT