Voltage Drop; Wiring/Terminal - Chrysler PT Cruiser Service & Repair Manual

8W - 01 - 10
WIRING DIAGRAM INFORMATION (Continued)
STANDARD PROCEDURE - TESTING FOR A

VOLTAGE DROP

(1) Connect the positive lead of the voltmeter to
the side of the circuit closest to the battery (Fig. 9).
(2) Connect the other lead of the voltmeter to the
other side of the switch, component or circuit.
(3) Operate the item.
(4) The voltmeter will show the difference in volt-
age between the two points.
Fig. 9 TESTING FOR VOLTAGE DROP
8W-01 WIRING DIAGRAM INFORMATION
SPECIAL TOOLS

WIRING/TERMINAL

TERMINAL REMOVING TOOLS 6932 AND 8638
PROBING TOOL PACKAGE 6807
TERMINAL PICK TOOL SET 6680
TERMINAL REMOVING TOOL 6934
PT