Battery Tray Support Bracket Removal; Installation - Chrysler PT Cruiser Service & Repair Manual

8F - 22 BATTERY SYSTEM
BATTERY TRAY SUPPORT
BRACKET
REMOVAL
(1) Disconnect and isolate the negative battery
cable.
(2) Remove the air cleaner housing.
(3) Remove the battery (Refer to 8 - ELECTRI-
CAL/BATTERY SYSTEM/BATTERY - REMOVAL).
(4) Remove the battery tray and battery tempera-
ture sensor.
(5) Raise the vehicle on a hoist.
(6) Working under the vehicle, remove two of the
battery tray support bracket retaining bolts.
(7) Lower the vehicle on the hoist.
(8) Remove the remaining two battery tray sup-
port bracket retaining bolts and remove the bracket
from the vehicle.

INSTALLATION

(1) Position the battery tray support bracket and
install the two battery tray support bracket retaining
bolts.
(2) Raise the vehicle on the hoist.
(3) Working under the vehicle, install the two bat-
tery tray support bracket retaining bolts.
(4) Lower the vehicle on a hoist.
(5) Install the battery tray and battery tempera-
ture sensor (if equipped).
(6) Install the battery (Refer to 8 - ELECTRICAL/
BATTERY SYSTEM/BATTERY - INSTALLATION).
(7) Install the air cleaner housing.
(8) Connect the negative battery cable.
PT