Removal Removal - 2.0/2.4L - Chrysler PT Cruiser Service & Repair Manual

PT
GENERATOR (Continued)
REMOVAL
REMOVAL - 2.0/2.4L
(1) Remove the air cleaner lid, disconnect the inlet
air sensor and makeup air hose.
(2) Disconnect the negative battery cable.
(3) Loosen the upper generator T-bolt lock nut
(Fig. 7).
Fig. 7 Generator T-Bolt Locknut and Adjustment
(4) Raise vehicle on hoist.
(5) Remove the right front wheel.
(6) Remove the accessory drive splash shield (Fig.
8).
Fig. 8 Accessory Drive Splash Shield
1 - ACCESSORY DRIVE BELT SPLASH SHIELD
Bolt
(7) Remove the pencil strut (Fig. 9).
Fig. 9 Pencil Strut
1 - PENCIL STRUT
(8) Loosen the lower pivot bolt (Fig. 10).
Fig. 10 Lower Pivot Bolt
1 - LOWER PIVOT BOLT
CHARGING 8F - 27