Clutch Disc And Pressure Plate Removal Removal-1.6L - Chrysler PT Cruiser Service & Repair Manual

6 - 10 CLUTCH
CLUTCH DISC AND PRESSURE
PLATE
REMOVAL
REMOVAL—1.6L
(1) Remove transaxle. (Refer to 21 - TRANSMIS-
SION/TRANSAXLE/MANUAL - REMOVAL)
(2) Mark position of pressure plate on flywheel
with paint or a scriber for assembly reference.
(3) Loosen and remove six (6) pressure plate-to-fly-
wheel bolts. Remove pressure plate and clutch disc
(Fig. 7).
Fig. 7 Clutch Disc and Pressure Plate
1 - FLYWHEEL
2 - CLUTCH DISC
3 - PRESSURE PLATE
4 - BOLT (6)
(4) Remove eight (8) flywheel-to-crankshaft bolts
and remove flywheel (Fig. 8).
(5) Inspect release lever and bearing (Fig. 9).
Replace as necessary. (Refer to 6 - CLUTCH/
CLUTCH RELEASE BEARING - REMOVAL)
Fig. 8 Flywheel-to-Crankshaft
1 - FLYWHEEL
2 - BOLT (8)
3 - CRANKSHAFT FLANGE
Fig. 9 Release Bearing and Lever
1 - RELEASE BEARING
2 - LEVER
PT