Removal - 2.4L Turbo - Chrysler PT Cruiser Service & Repair Manual

Hide thumbs Also See for PT Cruiser:

Table of Contents

GENERATOR (Continued)

(9) Loosen the accessory drive belt t-bolt.

(10) Unplug field circuit from generator (Fig. 11).

Fig. 11 Battery Connection

1 - FIELD CONNECTOR

2 - BATTERY CONNECTION

(11) Remove the B+ terminal nut and wire.

(12) Remove the generator belt, refer to the Cool-

ing section for more information.

(13) Remove the axle retaining nut.

(14) Remove the lower control arm from steering

(15) Remove axle shaft. Put a container under the

transmission to catch the transmission fluid from the

transmission.

(16) Remove the generator lower mounting bolt

and nut from the upper T-bolt.

(17) Remove generator out the bottom (Fig. 12).

Fig. 12 Generator Removal

REMOVAL - 2.4L TURBO

The generator is located above the oil filter and

axle shaft (Fig. 13).

Fig. 13 GENERATOR LOCATION - 2.4L TURBO

1 - Oil Filter

2 - Generator

3 - Axle Shaft

(1) Disconnect the negative battery cable.

(2) Remove the 2 bolts (Fig. 14) from the top of the

heat shield on the generator.

Fig. 14 GENERATOR HEAT SHIELD

Show Quick Links

Table of Contents