Chrysler PT Cruiser Service & Repair Manual page 335

PT
TRANSMISSION CONTROL MODULE (Continued)
CAUTION: TCM 60-way connector must be torqued
within 30-40 in. lbs. Improper torque may result in
connector damage, or connector sealing problems.
(3) Connect the TCM 60-way connector and torque
to 4 N·m (35 in. lbs.).
(4) Install wheel house splash shield.
ELECTRONIC CONTROL MODULES
(5) Install left front wheel/tire assembly (Fig. 28).
Torque lug nuts to 135 N·m (100 ft. lbs.) torque.
(6) Lower vehicle.
(7) Connect the battery negative cable.
8E - 21