Cooling System Pressure Cap Description - Chrysler PT Cruiser Service & Repair Manual

7 - 46 ENGINE - 2.0/2.4L DOHC
COOLANT RECOVERY CONTAINER (Continued)
Fig. 13 Overflow Hose Routing - 2.4L Turbo
1 - OVERFLOW HOSE
2 - COOLANT OUTLET CONNECTOR
Fig. 14 Coolant Recovery Container - 2.4L Turbo
1 - NUT
2 - SCREW
3 - COOLANT RECOVERY CONTAINER
(5) Connect overflow hose to coolant outlet connec-
tor (Fig. 11).
(6) Fill container to proper level.
Turbo
(1) Install coolant recovery container and tighten
fasteners to 4 N·m (35 in. lbs.) (Fig. 14).
(2) Connect throttle and speed control cables to
throttle body.
(3) Install throttle cable shield to throttle body.
(4) Connect overflow hose to coolant outlet connec-
tor (Fig. 13).
(5) Fill container to proper level.
COOLING SYSTEM PRESSURE
CAP
DESCRIPTION
The cooling system pressure cap (Fig. 15) is located
on the coolant outlet connector near the front of the
cylinder head. The pressure cap is constructed of stain-
less steel. Rubber seals provide sealing to the outlet
connector and to the coolant recovery system. A cali-
brated spring located between the cap and the connec-
tor seal provides for cooling system pressure release.
Fig. 15 Cooling System Pressure Cap
1 - FILLER NECK SEAL
2 - VACUUM VENT VALVE
3 - PRESSURE RATING
4 - PRESSURE VALVE
PT