Rear Center Seat Belt & Retractor Removal; Installation; Rear Seat Belt & Retractor Removal; Rear Seat Belt Buckle Removal - Chrysler PT Cruiser Service & Repair Manual

8O - 16 RESTRAINTS
PASSENGER AIRBAG COVER (Continued)
(2) Install the passenger airbag (Refer to 8 -
ELECTRICAL/RESTRAINTS/PASSENGER AIRBAG

- INSTALLATION).

WARNING: DO NOT CONNECT BATTERY NEGATIVE
CABLE YET (Refer to 8 - ELECTRICAL/RESTRAINTS
- DIAGNOSIS AND TESTING - AIRBAG SYSTEM).
(3) Close hood.
(4) Verify vehicle and system operation.
REAR CENTER SEAT BELT &
RETRACTOR

REMOVAL

(1) Detach Quick Connect Anchor by depressing
tab.
(2) Remove seat bezel.
(3) De-trim seat back upper (Refer to 23 - BODY/
SEATS/SEAT BACK COVER - REMOVAL).
(4) Lock seat back latch.
(5) Disconnect Locking Cable from retractor.
(6) Remove retractor bolt.
(7) Feed webbing and hardware through seat
frame and remove retractor.
INSTALLATION
(1) Feed webbing and hardware through seat
frame and install retractor.
(2) Install retractor bolt and tighten to 40 N·m (30
ft. lbs.).
(3) Connect locking cable to retractor.
(4) Unlock seat back latch.
(5) Re-trim rear seat back cover (Refer to 23 -
BODY/SEATS/SEAT BACK COVER - INSTALLA-
TION).
(6) Install seat bezel.
(7) Attach Quick Connect Anchor.
REAR SEAT BELT &
RETRACTOR
REMOVAL
(1) Remove turning loop cover.
(2) Remove turning loop bolt.
(3) Remove upper and lower trim bezels.
(4) Remove trim panel from body (Refer to 23 -
BODY/INTERIOR/LEFT QUARTER TRIM PANEL -
REMOVAL).
(5) Remove lower seat belt anchor bolt.
(6) Feed seat belt and hardware through trim
openings.
(7) Unbolt and remove the retractor and belt
assembly.
INSTALLATION
(1) Place rear seat belt retractor into position.
(2) Install bolt attaching retractor. Tighten the
retractor belt bolt to 40 N·m (30 ft. lbs.) torque.
(3) Feed seat belt and hardware through trim
opening.
(4) Install lower seat belt anchor bolt. Tighten to
40 N·m (30 ft. lbs.).
(5) Install trim panel (Refer to 23 - BODY/INTE-
RIOR/LEFT QUARTER TRIM PANEL - INSTALLA-
TION).
(6) Install upper and lower trim bezels.
(7) Install turning loop bolts.
(8) Install turning loop cover.
REAR SEAT BELT BUCKLE
REMOVAL
The rear seat belt buckles are riveted to the rear
seat lower pivot. To service the rear seat belt buckles,
the entire pivot assembly needs to be replaced.
SEAT AIRBAG
DESCRIPTION
Fig. 23 SEAT AIRBAG - TYPICAL
PT