Chrysler PT Cruiser Service & Repair Manual page 379

PT
STARTER MOTOR (Continued)
(3) Pushing the inner cooler hose up and out of the
way and remove the upper starter bolt (Fig. 12) and
ground wire.
Fig. 12 UPPER STARTER BOLT - 2.4L TURBO
(4) Raise vehicle and support
(5) Remove the inner cooler lower hose from the
inner cooler (Fig. 13).
Fig. 13 INNER COOLER LOWER MOUNTING - 2.4L
TURBO
(6) Remove the nuts that hold the lower inner
cooler tube (Fig. 14).
Fig. 14 INNER COOLER LOWER TUBE MOUNTING -
2.4L TURBO
1 - Lower Inner Cooler Tube
2 - Power Steering Line Brackets
3 - Studs
(7) Remove the studs that hold the power steering
lines (Fig. 14).
(8) Loosen and relocate the power steering lines
(Fig. 15).
Fig. 15 POWER STEERING LINE MOUNTING - 2.4L
1 - Lower Inner Cooler Tube
2 - Power Steering Lines
3 - Mounting Studs
STARTING
TURBO
8F - 43