8E - 12
ELECTRONIC CONTROL MODULES
POWERTRAIN CONTROL MODULE (Continued)
(3) Unlock the PCM connector by pulling on the
tab on the end of the PCM connector (Fig. 12).
Fig. 12 UNLOCKING PCM CONNECTOR
(4) Remove electrical connector from the PCM
(Fig. 13).
Fig. 13 PCM CONNECTOR
(5) Remove attaching nuts for PCM to bracket
(Fig. 14).
(6) Lift PCM up to remove it from vehicle.
Fig. 14 PCM LOCATION
REMOVAL - 2.0, 2.4, and 2.4L Turbo
(1) Disconnect the negative battery cable.
(2) Lift vacuum line out from behind the upper
support bracket (Fig. 15) and (Fig. 16).
Fig. 15 Powertrain Control Module
PT