Transmission - Chrysler PT Cruiser Service & Repair Manual

7 - 62

TRANSMISSION

AUTOMATIC TRANSMISSION OIL COOLER (Continued)
Fig. 2 Cooling Module - 2.4L Turbo
1 - RADIATOR
2 - A/C CONDENSER
3 - AUTOMATIC TRANSMISSION OIL COOLER
4 - AIR SEALS
5 - CHARGE AIR COOLER
Fig. 3 Automatic Transmission Oil Cooler -
Removal/Installation
1 - FRONT BUMPER (FASCIA REMOVED)
2 - TRANSMISSION OIL COOLER
3 - HOSES
4 - SCREWS
Turbo
NOTE: When the transaxle cooler lines are removed
from the rolled-groove type fittings at the cooler
and transaxle, damage to the inner wall of hose will
occur. To prevent potential leakage, the cooler
hoses and clamps must be replaced.
(1) Remove grille (Refer to 23 - BODY/EXTERIOR/
GRILLE - REMOVAL).
(2) Remove upper radiator closure panel (Refer to
23 - BODY/EXTERIOR/RADIATOR
PANEL - REMOVAL) (Fig. 4).
(3) Remove radiator closure panel center brace
(Fig. 4).
(4) Remove fasteners attaching transmission oil
cooler to air conditioning condenser (Fig. 5).
(5) Loosen hose clamps. Disconnect hoses from
transmission oil cooler.
(6) Remove transmission oil cooler.
Fig. 4 Upper Radiator Closure Panel and Center
1 - UPPER RADIATOR CLOSURE PANEL
2 - CENTER BRACE
CLEANING
Check the external cooler for debris on the cooling
fin surfaces. Clean as necessary.
CLOSURE
Brace
PT