Installation - Chrysler PT Cruiser Service & Repair Manual

8P - 10 SPEED CONTROL
VACUUM RESERVOIR (Continued)
(6) Remove the 2 screws from vacuum reservoir
(Fig. 19).
Fig. 19 Reservoir Mounting Screws
(7) Disconnect vacuum hose from reservoir (Fig.
20).

INSTALLATION

The vacuum reservoir is located in the right front
fender well on the frame rail (Fig. 19). It is made of
plastic.
(1) Connect hoses to reservoir.
Fig. 20 Vacuum Reservoir
1 - VACUUM RESERVOIR
(2) Install reservoir and tighten screws to 5 N·m
(45 ins. lbs.) (Fig. 19).
(3) Install the inner splash shield (Fig. 18).
(4) Lower vehicle.
(5) Install the negative battery cable.
(6) Install the air cleaner lid, connect the inlet air
temperature sensor and makeup air hose.
PT