Speaker Removal; Installation - Chrysler PT Cruiser Service & Repair Manual

8A - 12 AUDIO
SPEAKER (Continued)
Fig. 17 Front Door Speaker Remove/Install
INSTRUMENT PANEL SPEAKER
(1) Disconnect and isolate the battery negative
cable.
(2) Remove instrument panel top cover (Refer to
23 - BODY/INSTRUMENT PANEL/INSTRUMENT
PANEL TOP COVER - REMOVAL).
Fig. 18 INSTRUMENT PANEL SPEAKER
1 - INSTRUMENT PANEL SPEAKER
2 - INSTRUMENT PANEL
(3) Remove speaker retaining screws (Fig. 18).
(4) Remove speaker and disconnect wire harness
connector.
REAR SPEAKER
(1) Disconnect and isolate the battery negative
cable.
(2) Remove the D-pillar trim (Refer to 23 - BODY/
INTERIOR/D-PILLAR TRIM - REMOVAL).
(3) Remove the speaker retaining screws (Fig. 19).
(4) Remove the speaker and disconnect the wire
harness connector.
Fig. 19 Rear Speaker Remove/Install

INSTALLATION

FRONT DOOR SPEAKER
(1) Connect wire harness connector to speaker.
(2) Install speaker screws. Tighten to 2 N·m (20 in.
lbs.).
(3) Install the front door trim panel (Refer to 23 -
BODY/DOOR - FRONT/TRIM PANEL - INSTALLA-
TION).
(4) Connect the battery negative cable.
INSTRUMENT PANEL SPEAKER
(1) Connect wire harness connector to speaker.
(2) Install speaker screws. Tighten to 2 N·m (20 in.
lbs.).
(3) Install instrument panel top cover (Refer to 23
- BODY/INSTRUMENT
PANEL TOP COVER - INSTALLATION).
(4) Connect the battery negative cable.
REAR SPEAKER
(1) Connect wire harness connector to speaker.
(2) Install speaker screws. Tighten to 2 N·m (24 in.
lbs.).
(3) Install the D-pillar trim (Refer to 23 - BODY/
INTERIOR/D-PILLAR TRIM - INSTALLATION).
(4) Connect the battery negative cable.
PT
PANEL/INSTRUMENT