2: Installation And Setup; Projector Quick Setup And Installation; Install A Projection Lens - Christie M Series User Manual

2 Installation and Setup
This section explains how to install, connect and optimize the projector for delivery of superior image quality.
Illustrations are graphical representations only and are provided to enhance the understanding of the written
material.
2.1

Projector Quick Setup and Installation

The following instructions are for those preferring a quick setup. Refer to the remaining subsections for
detailed setup instructions.

2.1.1 Install a Projection Lens

The projection lens, shipped separately from the projector, must be installed prior to setting up the projector.
IMPORTANT! The lens seals the projector, preventing contaminants from entering the interior of the
1. Rotate the lens clamp to the OPEN position, as shown.
M Series User Manual
020-100009-08 Rev. 1 (05-2013)
Always power down the projector and disconnect all power sources before
servicing or cleaning.
See the Safety Warnings and Guidelines in
Remove the lens plug from the lens opening in the projector before installing
the lens. Retain the lens plug for projector transportation to protect the
optical components from dust and debris.
projector. Never operate a projector without a lens. Remove the rear lens cap from the lens.
Keep the front lens cap on the lens to protect it during installation.
Section 5 Maintenance.
2-1