Specifying Your Genlock Settings - Matrox MXO2 Installation And User Manual

152

Specifying your genlock settings

¦ Note
You can select the source to which you want to genlock all devices connected to
your MXO2 system, as well as adjust the timing settings for all video outputs
from MXO2. For examples of how to connect an external sync source to your
system, see
MXO2 Rack connections"
connections"
¦ Note
MXO2 genlocks to your selected video input source.
° To specify your genlock settings:
Click the Settings tab in the Project window, and then double-click Video
1
Output
In the Matrox Playback Settings dialog box, click the Genlock tab.
2
Under Genlock Source , select one of the following:
3
$
$
Chapter 10, Using Matrox MXO2 with Avid Editing Applications
This section does not apply to Matrox MXO2 Mini.
"Typical Matrox MXO2 connections"
on page 28, and
on page 37.
These genlock settings are used during playback only. During capture,
.
Internal Genlock to MXO2's internal reference signal. Select this
option only if you don't have an external sync generator or other reliable
external video sync source.
Black Burst Broadcast Quality
source connected to the reference (REF) input on MXO2. This must be a
stable sync source, such as an external sync generator (bi-level black burst
for SD or tri-level sync for HD), or a source VTR that has a built-in TBC.
on page 19, "Typical Matrox
"Typical Matrox MXO2 LE
Genlock to an external analog sync