Matrox MXO2 Installation And User Manual page 199

Pulldown Method
$
method you want to be applied to your video output ( Standard 2:3 or
Advanced 2:3:3:2
rate and the current video output format, a pulldown method may
automatically be selected.
Setup (NTSC) Use this to select the setup level you want for your
$
NTSC analog video. This affects both the NTSC analog video input and
output.
0 IRE Applies a setup level of 0 IRE. You should select this option
•
only when working with a commercial DV device that uses the
Japanese analog NTSC setup of 0 IRE. For example, if the video
appears too bright when you play back DV clips on your NTSC
monitor, you can change the setup to 0 IRE to output your DV clips at
the correct brightness.
Applies the standard NTSC setup level of 7.5 IRE.
7.5 IRE
•
Aspect Ratio Conversion
$
video to be output when upscaling or downscaling:
16x9 Letterbox
•
mode by adding black bars at the top and bottom of the picture for
display on a standard 4:3 television screen.
4x3 Pillarbox
•
adding black bars to the left and right sides of the picture for display on
a widescreen 16:9 television screen.
Anamorphic
•
compressed 4:3 video, which retains the picture's full vertical
resolution for display on a widescreen television. To display the video
with the correct proportions on an NTSC or PAL monitor, select the
16:9 display setting on the monitor.
Center Cut Outputs the widescreen 16:9 picture by evenly cropping
•
the left and right sides of the picture for display on a standard 4:3
television screen.
Center Zoom
•
the top and bottom edges of the picture for display on a widescreen
16:9 television screen.
YUV/RGB (for analog output) Select YUV or RGB - native to set the
$
type of video signal that is sent from the component output. For example,
select RGB - native if you connected the component output to a device
that accepts an RGB signal.
YUV/RGB (for HDMI output) Select the type of video signal that you
$
want to be sent from the HDMI output:
If this setting is available, select the pulldown
). Depending on your editing video format's frame
Use this to specify how you want your
Outputs the widescreen 16:9 picture in letterbox
Outputs the standard 4:3 picture in pillarbox mode by
Outputs the widescreen 16:9 picture as horizontally
Outputs the standard 4:3 picture by evenly cropping
Defining your A/V Tools options
179