Overview; Specifying Your Settings For Media Streaming - Matrox MXO2 Installation And User Manual

212

Overview

You can use Matrox MXO2 or any combination of Matrox I/O devices (MXO2
and Mojito MAX products) to feed live video and audio to Telestream Wirecast
for streaming, and simultaneously record your original feeds to disk. The
easy-to-use Matrox ISO recording tool lets you create high-quality ISO
recordings of your feeds, ready for post-event editing in your favorite editing
application.
Using Wirecast, you can choose any stereo pair for your streaming production.
When streaming HDMI or SDI video, you can simultaneously record up to eight
channels of embedded audio to disk using the Matrox ISO recording tool. You
have complete flexibility to go from a simple stereo mix to surround sound for
your post-event editing needs.

Specifying your settings for media streaming

This section provides instructions on how to use your Matrox hardware for video
and audio streaming in Telestream Wirecast.
Connect the video and audio input sources that you want to stream to the
1
corresponding inputs on your Matrox hardware.
In Telestream Wirecast, click
2
source that you want to stream, and then select your Matrox device (do not
select Matrox A/V Input).
¦ Note
for each input source that you want to stream, such as for input 1, input 2, and
input 3 to stream from three devices.
For each Matrox shot added in step 2, select the shot, click
3
select your Matrox device as the audio source for the shot. Alternately, you
can select a system audio source for your shot.
¦ Note
audio sources, a shot must have been added for that Matrox device or system
audio source (see step 2).
Chapter 15, Using Matrox MXO2 with Telestream Wirecast
If you have multiple Matrox I/O devices, you must add a Matrox shot
For a Matrox device or system audio source to appear in the list of
to add a new Matrox shot for the input
, and then