Defining Your Capture Settings - Matrox MXO2 Installation And User Manual

184

Defining your capture settings

The Matrox Capture Settings dialog box has pages that you can use to specify
your settings for capturing video and audio in A/V Tools. The settings available
are based on your editing video format and your input source (video is always
captured to your selected editing video format). For a list of the supported
capture formats, see
Formats." For a list of the supported video output formats for monitoring the
video that you're capturing, see
on page 311.
¦ Note
displayed to let you monitor your audio input levels. For more information, see
"Monitoring audio levels for capture"
Specifying your video capture settings
You can capture video to MPEG-2 I-frame or uncompressed format, depending
on your selected editing video format and source video format. For example, you
can choose to capture analog NTSC clips to Matrox MPEG-2 I-frame .avi files.
° To specify your settings for capturing video in A/V Tools:
1 Click the Options button in the Matrox A/V Tools dialog box.
Click the Capture Settings button. This displays the Matrox Capture
2
Settings
¦ Note
right-clicking the clip list and selecting Capture Settings .
Chapter 11, Using Matrox A/V Tools
Appendix C, "Matrox MXO2 Supported Input and Capture
When you specify your capture settings in A/V Tools, VU meters will be
dialog box.
You can also access the Matrox Capture Settings dialog box by
"Supported video output formats for monitoring"
on page 190.