Defining Your Video Preview Settings - Matrox MXO2 Installation And User Manual

Defining your video preview settings

When you select an MPEG-2 I-frame, uncompressed 10-bit, or uncompressed
8-bit sequence preset, an appropriate Matrox preview file format and codec are
automatically set for rendering your video previews on MXO2. When you create
a custom preset using a Matrox codec editing mode, you can specify the Matrox
codec that you want to use to render your video previews. To check your video
preview settings, choose Sequence > Sequence Settings .
Depending on your sequence's video format, you can select a different preview
file format or Matrox codec to render your video previews. For details on
configuring the Matrox MPEG-2 I-frame codec settings, see
MPEG-2 I-frame settings"
Remarks
• For an SD sequence, make sure that the preview file format matches your
sequence's format (standard or widescreen).
• To use the Matrox MPEG-2 I-frame codec for rendering video previews in
an NTSC or 486p sequence, select the appropriate MPEG-2 I-frame preview
file format, such as MPEG-2 I-frame NTSC Standard for a Matrox NTSC
standard sequence.
• If you set the bit depth for your video output on MXO2 to 10-bit, you must
use the Matrox 10-bit uncompressed codec for rendering video previews.
You must also select Maximum Bit Depth in order to output 10-bit video
when the playback is paused. For more information, see
10-bit editing workflow"
For details on specifying additional settings for your video previews, see your
Adobe Premiere Pro documentation.
on page 80.
on page 55.
Defining your video preview settings
"Selecting your
"About the Matrox
69