96
$
¦ Note
capabilities for assemble and insert editing. To perform an insert edit, the edit
mode for Matrox device control must be set to Auto Edit or Basic Edit as
explained in
$
Use the transport controls to play back your tape. The current time code of
8
your tape appears in the text box above the transport controls. You can also
use the
L
speed of the shuttling.
Specify where you want the recording to start and stop as follows:
9
$
$
¦ Note
selected In and Out points. When Duration is selected, the Out point is
calculated based on your specified In point and duration.
Click Export to start the export to tape.
10
Chapter 8, Using Matrox MXO2 with Adobe Premiere Pro
Records selected tracks (video and/or audio), without affecting
Insert
the control track. This lets you perform a video or audio dub. For
example, you can choose to record only video, only selected audio tracks,
or video and selected audio tracks from your sequence.
Check your device's documentation to determine its recording
"Setting up Matrox device control"
Select Abort export on dropped frames if you'd like the export to tape
to automatically stop when dropped frames are encountered. You'll get a
warning if the export to tape is aborted due to a dropped frame.
,
, and
shortcut keys to control the shuttle. Press
J
K
L
to shuttle right, and
K
Click the Set In Point button (
recording to start, or enter the required time code in the In box.
Click the Set Out Point button (
recording to stop, or enter the required time code in the Out box.
Alternately, you can select Duration and enter the duration you want for
the recording. The Out point will then be calculated for you. By default,
the duration is set to the duration of the work area. You can click Reset at
any time to set the duration back to the duration of the work area.
When Out is selected, the duration is calculated based on your
to stop. Pressing
or
J
) to specify where you want the
) to specify where you want the
on page 90.
to shuttle left,
J
multiple times increases the
L
Need help?
Do you have a question about the MXO2 and is the answer not in the manual?
Questions and answers