Matrox MXO2 Installation And User Manual page 202

182
selected genlock source. When you change the genlock source, distorted video
and silent audio will be output until MXO2 locks to the new genlock source.
Under Genlock Video Format , select your genlock source's video format.
5
If you can't select a video format, make sure that your genlock source
matches the specified video format. When the genlock source is set to
Internal
Under Advanced Settings , drag the Horizontal Delay and Vertical Delay
6
sliders to adjust the horizontal and vertical timing of your video outputs with
respect to your genlock source. This lets you compensate for cable delays
within your system.
Click OK to save your settings.
7
Chapter 11, Using Matrox A/V Tools
, the genlock video format is set to your main video output format.