Specifying Settings In The Matrox Iso Recording Tool - Matrox MXO2 Installation And User Manual

218
Click
9
to view the recorded video/audio files, including the record log file
(Record.Log).
Once you've finished recording, you can import your recorded video and audio
files into an editing application, such as Adobe Premiere Pro, for post-event
editing.
Specifying settings in the Matrox ISO recording
tool
To specify the settings that you want for recording your clips, select any Matrox
device under MATROX INPUT DEVICES in the Source Settings dialog box,
and then click the ISO Record button.
¦ Note
box by clicking
Record path
Under Record Path , specify the destination where all your recorded clips will be
stored, or click Browse to select the location that you want. Every recording
session generates a separate subfolder within the specified location, in the form
YYYY-MM-DD HHMMSS, which contains the recorded video and audio files,
and the log file (Record.Log) for that recording session.
Input selection
Under Matrox Input , select the Matrox input(s) that you want to record. You can
also select or clear an input during a recording session (see
page 223). You must have a valid input signal in order for an input to be recorded.
For more information on the input states and how they affect recording, see
"Input states and video formats"
Chapter 15, Using Matrox MXO2 with Telestream Wirecast
to open Windows Explorer at the specified Record Path location
You can hide or show the settings in the Matrox ISO Record dialog
or respectively.
on page 225."
"Input recording" on