Installing Selector Shaft; Installing Selector Drum - BMW R 1150 GS Repair Manual

3
11

Installing selector shaft

•
Place a spacer of correct thickness on the hous-
ing.
•
Install selector shaft (1), making sure that
spring (2) is correctly positioned.
10 9
1
2
R21230130

Installing selector drum

•
Place a spacing washer of the correct thickness
and the input-side thrust washer on selector
drum (6) and secure with a small amount of
grease.
•
Swing locking lever (8) toward the input shaft and
install the selector drum.
•
Swing locking lever (8) towards selector drum (6),
pull back guide plate (7) and engage it in the se-
lector drum.
•
Place shift forks (5, 10) in the guide tracks.
•
Install selector shafts (3).
•
Install torsion spring (9).
•
Install locking pin (11).
•
Place thrust washer (4) on the selector drum.
3
4
5
6
7
8
R21230040
23.25