3
11
Installing selector shaft
2
•
Place a spacing washer of the correct thickness
in position and install selector shaft (1).
•
Engage torsion spring (2) in the housing.
10
9
1
C230060
Installing selector drum
•
Place a spacing washer of the correct thickness
and the input-side thrust washer on selector
drum (6) and secure with a small amount of
grease.
•
Swing locking lever (8) toward the drive shaft and
install the selector drum.
•
Swing locking lever (8) towards selector drum (6)
and engage it in position together with guide
plate (7).
•
Place shift forks (5, 10) in the guide tracks.
•
Install selector shafts (3).
•
Install locking pin (11).
•
Place thrust washer (4) on the selector drum.
3
4
5
6
7
8
S230040
23.23