Installing Crankshaft; Installing Timing Chain Tensioning And Slide Rails; Installing Auxiliary Shaft/Timing Chains - BMW R 1100 S Repair Manual

2
3

Installing crankshaft

e
Caution:
Oil the bearings.
Installing timing chain tensioning and
slide rails
•
Seal pivot pin for tensioner rail/slide rail at clutch
side (arrow) with 3-Bond 1209.
•
Insert pivot screw (1) into chain tensioner rail, us-
ing a new seal.
X
Tightening torque:
Chain guide rail pivot pin .............................. 18 Nm
11.44
1

Installing auxiliary shaft/timing chains

•
When installing the auxiliary shaft, make sure that
the bore in the auxiliary shaft (2) facing the crank-
shaft is in line with the crankcase mating face.
e
Caution:
Timing chains (3) must mesh fully with auxiliary shaft
sprockets.
u
S110080