Engine Oil - Changing; Gear Oil - Changing - BMW K75 Repair Manual

Engine oil-changing 1,11,111
Remove oil drain plug (1) in the oil sump and drain off the
engine oi l at normal operating temperature.
Release retaining screws forthe oil filter cover and
remove the cover.
Renew the drain plug sealing ring.
Tightening torque:
Oil drain plug
18 ± 2Nm
Unscrew the oil filter element with oil fi lter wrench BMW
11 4 650 and open-ended wrench.
When installing:
Wet the sealing ring of the new filter element with oi l.
Screw in the filter element hand-tight only!
Replace O-ring seal if damaged.
Tightening torque:
Machine screw for cover/oil filter
Oil filling capacity :
Oil grades: see Service Data, page 00 - 29.0.
Gear oil - changing 11, 111
6 ± 1Nm
3.751
Remove oil drain plug on gearbox (arrows) and allow oil to
drain out .
(Two versions: in front of and behind centre stand.)
Renew drain plug sealing ring .
Tightening torque:
Oil drain plug 20 ± 3Nm
Remove oil filler plug.
After refilling with fresh oil, check the oillevel with hook
wrench included in the toolkit. The oil must come up to the
mark on the hook wrench .
Renew sealing ring for filler plug.
Oil filling capacity: 0.851
Oil grades: see Service Data, page 00-29.0
Tightening torque:
Oil filler plug 20 ± 3 Nm
24900070
24900035
8.87
00-31 .0