Maintenance
Key to maintenance intervals
–
BMW Inspection at 1,000 km (600 miles)
–
BMW Service every 10,000 km (6,000 miles) II
–
BMW Inspection, every 20,000 km
(12,000 miles)
–
BMW Annual Service
Reading out MoDiTeC fault memory
(Inspections I, II, III and IV)
•
Remove the seat.
•
Connect the BMW MoDiTeC to the diagnosis
connector.
•
Read out the fault memory.
•
Perform all requisite repair work.
Changing engine oil, replacing oil
filter element
(Inspections I, II, III and IV)
L
Note:
If the motorcycle is ridden only for short distances or
outside temperatures are below 0°C (32°F) change
the oil and replace the oil filter element every
3 months, or not later than every 3,000 km
(1,800 miles).
•
Change the oil at operating temperature.
•
Remove screw plug.
00.22
I
III
IV
MAX
MIN
S000040
11 4 650
•
Remove oil drain plug and drain off oil.
•
Reinstall the oil drain plug with a new sealing
ring.
•
Use oil filter wrench, BMW No. 11 4 650, to re-
move the oil filter.
•
Coat sealing ring on new oil filter element with oil
and install filter.
•
Refill with oil to correct level.
•
Install the screw plug.
e
Caution:
Never top up the engine-oil level past the "MAX"
mark.
X
Tightening torque:
Oil filter......................................................... 11 Nm
Oil drain plug................................................ 32 Nm
Engine oil quantities:
With oil filter change ................................................
..................... 3.75 l (6.6 Imp. pints/3.96 US quarts)
Without oil filter change...........................................
..................... 3.50 l (6.2 Imp. pints/3.69 US quarts)
Quantity of oil between
MIN and MAX marks ...............................................
.......................0.50 l (0.88 Imp. pint/0.52 US quart)
Engine oil grade:
Brand-name HD oil for spark-ignition engines, API
classifications SF, SG, SH; combination with CD or
CE specification.
Brand-name HD oil of CCMC classification G4, G5;
amendment PD2 is permissible.
C000030