Changing Engine Oil, Replacing Oil Filter Element; (Inspections I, Ii, Iii And Iv) - BMW R1150RT - MAINTENANCE INTEGRAL ABS Maintenance Manual

Table of Contents

Advertisement

Changing engine oil, replac-
00 11 209
ing oil filter element

(Inspections I, II, III and IV)

L
Note:
If the motorcycle is ridden only for short distances or
outside temperatures are below 0°C (32°F) change
the oil and replace the oil filter element every 3
months, or not later than every 3,000 km (1,800
miles).
Change the oil at operating temperature.
R22000080
Remove screw plug.
Remove oil drain plug and drain off oil.
11 4 650
C000030
Use oil filter wrench, BMW No. 11 4 650, to re-
move the oil filter.
Coat sealing ring on new oil filter element with oil
and install filter.
Reinstall the oil drain plug with a new sealing
ring.
Refill with oil to correct level.
00.30
Insert and tighten the screw plug.
e
Attention:
Never top up the engine-oil level past the “MAX”
mark.
X
Tightening torque:
Oil filter......................................................... 11 Nm
Oil drain plug................................................ 32 Nm
Engine oil capacities:
with oil filter renewal
................... 3.75 l (6.60 Imp. pints/3.96 US quarts)
without oil filter renewal
................... 3.50 l (6.16 Imp. pints/3.69 US quarts)
Quantity of oil between MIN and MAX marks
................... 0.50 l (0.88 Imp. pints/0.52 US quarts)
Engine oil grade:
Brand-name HD oil for spark-ignition engines, API
classifications SF, SG, SH; combination with CD or
CE specification.
Brand-name HD oil of CCMC classification G4, G5;
amendment PD2 is permissible.
BMW recommends Castrol

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R 1150 rt

Table of Contents