Batch & Single User Creation; Steps On Adding Single User; Figure 5: Create User Extension - Extensions; Figure 6: Create User Extension - Create New User - Grandstream Networks UCM6102 Basic Configuration Manual

B & S U
ATCH INGLE SER
So now that there's extension ranges configured, we can now begin creating users to prepare for the
provisioning process. There are two methods of creating a user. One method would be creating a single
user. The other method would be creating a batch of users.
S A S
TEPS ON DDING INGLE
1. Navigate to PBX Basic/Call Routes  Extensions.
Extension defined".
2. Click on "Create New User"
3. On the "Create New User" screen, users can enter in quite a few options, but they are not required for
this tutorial. Click "Save" at the bottom of the page.
After clicking "Save" the Extensions page will display with the single SIP extension that was just created.
Here the user has the ability to edit the extensions by clicking the
C
REATION
U
SER
Figure 5: Create User Extension – Extensions
Figure 6: Create User Extension – Create New User
For first time setups users will see "No
at the right.
7