Restore Configuration From Backup File; Figure 253: Restore Ucm6200 From Backup File - Grandstream Networks UCM6202 User Manual

Before saving the configuration, users could click on
server to make sure the server is up and accessible for the UCM6200. Save the changes and all the backup
logs will be listed on the web page. After data sync is configured, users could also manually synchronize all data
by clicking on

Restore Configuration from Backup File

To restore the configuration on the UCM6200 from a backup file, users could go to Web
GUIMaintenanceBackupBackup/Restore.
•
A list of previous configuration backups is displayed on the web page. Users could click on
desired backup file and it will be restored to the UCM6200.
•
If users have other backup files on PC to restore on the UCM6200, click on "Upload Backup File" first and
select it from local PC to upload on the UCM6200. Once the uploading is done, this backup file will be
displayed in the list of previous configuration backups for restore purpose. Click on
backup file.
----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
•
The uploaded backup file must be a tar file with no special characters like *,!,#,@,&,$,%,^,(,),/,\,space in
the file name.
•
The uploaded back file size must be under 10MB.
------------------------------------------------------------------------------------ ---------------------------------------------------------------
instead of waiting for the backup time interval to come.

Figure 253: Restore UCM6200 from Backup File

UCM6200 Series User Manual
. The UCM6200 will then try connecting the
to restore from the
P a g e
of the
| 344