Xs_Package_Identifier_2; Xs_Lane_Status; Xs_Test_Control; Test_Config - Texas Instruments TLK3134 Data Manual

www.ti.com
ADDRESS: 0x000F
BIT(s)
4/5.15.15:0 OUI c:r
ADDRESS: 0x0018
BIT(s)
4/5.24.12 Align Status
4/5.24.11 Pattern Testing Ability Always reads 1. Able to generate test patterns
4/5.24.10 Loopback Ability
4/5.24.3 Lane 3 Sync
4/5.24.2 Lane 2 Sync
4/5.24.1 Lane 1 Sync
4/5.24.0 Lane 0 Sync
ADDRESS: 0x0019
BIT(s)
Receive Test-Pattern
4/5.25.2
Enable
4/5.25.1:0 Test-Pattern Select
ADDRESS: 0x8000
BIT(s) NAME
4/5.32768.2 10GFC_CJPAT Enable
4/5.32768.1 CRPAT enable
4/5.32768.0 CJPAT enable
ADDRESS: 0x8001
BIT(s) NAME
10GFC_CJPAT check
4/5.32769.2
enable
4/5.32769.1 CRPAT Check Enable
4/5.32769.0 CJPAT Check Enable
Copyright © 2007–2009, Texas Instruments Incorporated
Table 2-28. XS_PACKAGE_IDENTIFIER_2
NAME
Organizationally unique identifier Manufacturer model and revision
number.
Table 2-29. XS_LANE_STATUS
NAME
When 1, indicates all lanes are aligned
Always read 1. Has the ability to perform loopback function
1 = Lane 3 is synchronized
0 = Lane 3 is not synchronized
1 = Lane 2 is synchronized
0 = Lane 2 is not synchronized
1 = Lane 1 is synchronized
0 = Lane 1 is not synchronized
1 = Lane 0 is synchronized
0 = Lane 0 is not synchronized
Table 2-30. XS_TEST_CONTROL
NAME
1 = Enables test pattern generation/verification (High/Low/Medium)
0 = Test pattern generation/verification disabled (Default)
00 = High frequency test pattern (Default)
01 = Low frequency test pattern
10 = Mixed frequency test pattern
11 = Reserved
Table 2-31. TEST_CONFIG
When set, enables the 10G Fiber channel compliant CJPAT test pattern
generation on all 4 lanes. (Default 1'b0)
When set, enables the CRPAT test pattern generation on all 4 lanes.
(Default 1'b0)
When set, enables the CJPAT test pattern generation on all 4 lanes.
(Default 1'b0)
Table 2-32. TEST_VERIFICATION_CONTROL
When set, enables the verification of 10G Fiber channel compliant
CJPAT test mode. (Default 1'b0)
When set, enables the verification of CRPAT test mode. (Default 1'b0)
When set, enables the verification of CJPAT test mode. (Default 1'b0)
Submit Documentation Feedback
Product Folder Link(s):
SLLS838F – MAY 2007 – REVISED DECEMBER 2009
DEFAULT: 0x50D0
DESCRIPTION
DEFAULT: 0x0C00
DESCRIPTION
DEFAULT: 0x0000
DESCRIPTION
DEFAULT: 0x0000
DESCRIPTION
DEFAULT: 0x0000
DESCRIPTION
TLK3134
TLK3134
ACCESS
RO
ACCESS
RO
RO
RO
RO
RO
RO
RO
ACCESS
RW
RW
ACCESS
RW
ACCESS
RW
Detailed Description 53