Figure 4-45 Remote Loop Network - Zte ZXR10 2910E-PS Configuration Manual

Command
zte(cfg)#set ethernet-oam port <portlist> link-monitor {enable | disable}
zte(cfg)#set ethernet-oam port <portlist> link-monitor symbol-period
threshold <1-65535> window <1-65535>
zte(cfg)#set ethernet-oam port <portlist> link-monitor frame threshold
<1-65535> window <1-60>
zte(cfg)#set ethernet-oam port <portlist> link-monitor frame-period
threshold <1-65535> window <1-600000>
zte(cfg)#set ethernet-oam port <portlist> link-monitor frame-seconds
threshold <1-900> window <10-900>
show ethernet-oam (all configuration modes)
show ethernet-oam port (all configuration modes)
show ethernet-oam port <portlist> discovery (all configuration modes)
show ethernet-oam port <portlist> statistics (all configuration modes)
show ethernet-oam port <portlist> link-monitor (all configuration modes)
OAM Remote Loopback Configuration Instance
l
Configuration Description
OAM monitor function can notify the abnormal frame of link receiver to the local. The
function is based on OAM discovery. As shown in
the switch through console port and configures OAM. Enable OAM and the port link
monitor of the other end. Then the error frame and the error symbol can be detected
and notify local switch.

Figure 4-45 Remote Loop Network

l
Configuration Procedure
1. Configuration of switch A:
zte(cfg)#set ethernet-oam en
zte(cfg)#set ethernet-oam port 1 en
2. Configuration of switch B:
SJ-20120409144109-002|2012-07-02(R1.0)
Chapter 4 Service Configuration
Function
Enables or disables link monitor
function.
Sets the symbol period event which is
used for link monitor.
Sets the error frame.
Sets the period of error frame.
Sets error frame summary.
Displays OAM global configuration
information.
Displays OAM port summary
information.
Displays port OAM discovery state.
Displays port OAM statistics
information.
Displays port OAM link event
configuration and state.
4-113
ZTE Proprietary and Confidential
Figure 4-45,The user logs in to