Zte ZXR10 2910E-PS Configuration Manual page 202

ZXR10 2900E Series Configuration Guide
Command
zte(cfg)#clear remote-access ipaddress <A.B.C.D>[<A.B.C.D>]
show remote-access (all configuration modes)
REMOTE-ACCESS Configuration Instance1
l Configuration Description
Only allow the network management user to access the switch from 192.168.1.0/24
through Telnet SSH SNMP Web.
l Configuration Procedure
zte(cfg)#set remote-access specific
zte(cfg)#set remote-access ipaddress 192.168.1.0 255.255.255.0
zte(cfg)#show remote-access
Whether check remote manage address: YES
Allowable remote manage address(es) and application(s):
192.168.1.0/255.255.255.0
REMOTE-ACCESS Configuration Instance2
l
Configuration Description
Only allow the network management user to access the switch from 192.168.1.1
through Telnet SSH SNMP Web.
l
Configuration Procedure
zte(cfg)#set remote-access specific
zte(cfg)#set remote-access ipaddress 192.168.1.1
zte(cfg)#show remote-access
Whether check remote manage address: YES
Allowable remote manage address(es) and application(s):
192.168.1.1/255.255.255.255
REMOTE-ACCESS Configuration Instance3
l
Configuration Description
Allow the network management user to access the switch from 192.168.1.1 through
Telnet/SSH.
l
Configuration Procedure
zte(cfg)#set remote-access specific
zte(cfg)#set remote-access ipaddress 192.168.1.1
zte(cfg)#show remote-access
Whether check remote manage address: YES
Allowable remote manage address(es) and application(s):
SJ-20120409144109-002|2012-07-02(R1.0)
snmp, telnet, ssh, web
snmp, telnet, ssh, web
5-2
ZTE Proprietary and Confidential
Function
Deletes the configuration of
specified IP address and segment
address.
Displays the configuration
information of REMOTE-ACCESS.