Zte ZXR10 2910E-PS Configuration Manual page 86

ZXR10 2900E Series Configuration Guide
zte(cfg)#set stp enable
/*enable the stp protocol of switch1 and switch2*/
zte(cfg)#set stp forceversion mstp
/*set the STP forceversion as mstp*/
zte (cfg)#set stp name zte
/*set switch1 and switch2 in the same area*/
zte(cfg)#set stp revision 10
zte(cfg)#set stp instance 1 add vlan 10-20
l
Configuration Verification
1. Check the STP state of switch 1 and switch 2 in the system view.
zte(cfg)#show stp
2. Check the STP state of switch 1 in the system view.
zte(cfg)#show stp instance
MST00
SJ-20120409144109-002|2012-07-02(R1.0)
The spanning_tree protocol is enabled!
The STP ForceVersion is MSTP !
Revision: 10 Name: zte
Cisco key: 0x13ac06a62e47fd51f95d2ba243cd0346
Cisco digest: 0x00000000000000000000000000000000
Huawei key: 0x13ac06a62e47fd51f95d2ba243cd0346
Huawei digest: 0x00000000000000000000000000000000
Instance VlanMap
-------- -------------------
0 1-9,21-4094
1 10-20
Spanning tree enabled protocol mstp
RootID:
Priority : 32768
HelloTime(s) : 2
ForwardDelay(s): 15
Reg RootID:
Priority : 32768
RemainHops : 20
BridgeID:
Priority : 32768
HelloTime(s) : 2
ForwardDelay(s): 15
Interface PortId Cost
--------- ------ ------- ------- ---------- ----- -----------
1 128.1 200000
2 128.2 200000
MST01
Spanning tree enabled protocol mstp
RootID:
Priority : 32769
Address : 00.d0.d0.02.00.54
MaxAge(s): 20
Address : 00.d0.d0.02.00.54
Address : 00.d0.d0.02.00.54
MaxAge(s): 20
MaxHops : 20
Status Role Bound GuardStatus
Forward Designated MSTP
Forward Designated MSTP
Address : 00.d0.d0.02.00.54
4-40
ZTE Proprietary and Confidential
None
None