Zte ZXR10 2910E-PS Configuration Manual page 99

Command
zte(cfg)#set qos traffic-shaping ge-port <25-28> queue <1-7>{data-rate
<2-1000> burst-size <8-4094>| disable}
zte(cfg)#set qos traffic-shaping xge-port <2/1-2/4>{data-rate <2-10000>
burst-size <8-4094>| disable}
zte(cfg)#set qos traffic-shaping xge-port <2/1-2/4> queue <1-7>{data-rate
<2-10000> burst-size <8-4094>| disable}
zte(cfg)#set anti-DoS {enable | disable}
show qos priority-mapping port [<1-28>] (all configuration modes)
show qos priority-mapping qos-profile [<0-127>| dscp-to-dscp |
dscp-to-profile | up-to-profile] (all configuration modes)
show qos queue-schedule mode (all configuration modes)
show qos queue-schedule port <1-28> (all configuration modes)
show qos queue-schedule session [<1-7>] (all configuration modes)
show qos traffic-limit [port <1-28>] protect (all configuration modes)
show qos traffic-limit [port <1-28>] (all configuration modes)
show qos traffic-shaping [port <1-28>] (all configuration modes)
show anti-dos (all configuration modes)
zte(cfg)#set qos policer <0-383> mode {aware | blind} cir <32-1048576>
cbs <20000-268435456>{ebs <20000-268435456>| pir <32-1048576> pbs
<20000-268435456>}
zte(cfg)#set qos policer <0-383> exceed-action red {no-operation | drop
| remark} yellow {no-operation | drop | remark}
zte(cfg)#set qos policer <0-383> exceed-action remark profile <0-127>
up {no-change | enable-modify | disable-modify} dscp { no-change |
enable-modify | disable-modify }
zte(cfg)#set qos policer counter-mode {L1 | L2 | L3}
zte(cfg)#set qos policer <0-383> counter <0-255>{enable | disable}
SJ-20120409144109-002|2012-07-02(R1.0)
Chapter 4 Service Configuration
Function
Sets 1000M egress shaping rate based
on queue.
Sets the Egress shaping rate for the
10000 M port.
Sets the queue-based Egress shaping
rate for the 10000 M port.
Enables or disables the anti-DoS
attacking function.
Displays priority mapping configuration
based on port.
Displays various priority-mapping
configuration related to QoS-profile.
Displays QoS queue scheduling unit.
Displays the queue scheduling policy of
each queue of the port.
Displays the configuration of scheduling
policy template.
Displays the egress rate limiting
configuration of the port.
Displays ingress rate limit configuration.
Displays egress shaping configuration.
Displays anti-dos attacking
configuration.
Sets flow policer.
Sets flow policing action.
Sets the binding and action
implementation mode between
flow policer and QoS profile.
Sets flow policer statistics mode.
Enables or disables flow policer
statistics function and configures the
binding between flow policer and
Counter.
4-53
ZTE Proprietary and Confidential