Zte ZXR10 2910E-PS Configuration Manual page 48

ZXR10 2900E Series Configuration Guide
TACACS+ Configuration.........................................................................................4-133
Time Range Configuration......................................................................................4-135
Voice VLAN Configuration ......................................................................................4-136
802.1AG Configuration ...........................................................................................4-138
Y.1731 Configuration ..............................................................................................4-144
MAC-based VLAN Command Configuration ...........................................................4-149
DHCP Relay Configuration .....................................................................................4-150
4.1 Management Configuration
Management Configuration Overview
Management configuration includes the following commands:
1. Mode switch configuration
2. Console attribute configuration
3. Global information configuration
4. Switch user access configuration
Configuring Management Service
The configuration of management service includes the following commands:
Command
config group
zte(cfg)#
config router
zte(cfg)#
config snmp
zte(cfg)#
config tffs
zte(cfg)#
config nas
zte(cfg)#
config mac-based-vlan
zte(cfg)#
exit (All configuration mode)
enable
zte>
list (all configuration modes)
set auto-reset <2-120>
zte(cfg)#
line-vty timeout <1-12>
zte(cfg)#
set date <yyyy-mm-dd> time <hh:mm:ss>
zte(cfg)#
set date summer-time {one-year
zte(cfg)#
| repeating}{date <yyyy-mm-dd><hh:m
m:ss><yyyy-mm-dd><hh:mm:ss>| week
<week><day><month><year><hh:mm:ss><wee
k><day><month><year><hh:mm:ss>}[<60-1440>]
SJ-20120409144109-002|2012-07-02(R1.0)
Function
Enters cluster management configuration mode
Enters layer-3 interface configuration mode.
Enters SNMP configuration mode.
Enters file system configuration mode.
Enters service configuration mode.
Enters mac based vlan configuration mode.
Returns to the original command line mode.
Enters global configuration mode from user configuration
mode.
Lists all valid configuration commands in current mode.
Sets switch Console automatic log-out time.
Sets Telnet user login timeout time.
Sets switch date and time.
Sets the time period when the daylight saving time is used.
4-2
ZTE Proprietary and Confidential